CLEAN ROOM

Meets or exceeds the requirements of the following specifications:

  • North Coast Composites Area Requirements For Composite Fabrication
  • P.S. 20509 Area Requirements For Adhesive Bonding / Composites Fabrication
  • P.S. 14274 Resin Transfer Molding of Composites, Fabrication and Acceptance Of
  • 5PTPLT13 Qualification, Approval And Control of Bismaleimide Resin Transfer Molded Parts and Primary Structural Application
  • 5PTPLT12 Qualification, Approval And Control of Epoxy Resin Transfer Molded Parts and Primary Structural Application
  • BAC 5336 Fabrication Of Resin Transfer Molded (RTM) Fiber Reinforced Composite Parts


SPECIFICATIONS

  • 1824 sq. ft.
  • 32 ft x 57 ft x 17 ft high ceiling
  • Acoustic drop ceiling
  • Constant positive pressure
  • Monitored by Dwyer / Magnehelic Differential Pressure Gage
  • Temperature and humidity controlled
  • Monitored by Supco Dual Set Point Temperature Alarm (beeper)
  • Monitored by Supco THC200 Thermo-Hygrometer Clock with alarm (buzzer)
  • Data logging via Supco Temperature & Humidity Data Logger & Software
  • Fixed lifting capacity
  • 5 ton Overhead beam crane
  • 30 ft span with 12 ft lift height
  • Manual 5 ton chain hoist


EQUIPMENT

  • CNC Automated Ply Cutter
  • Carlson Pro2 High-Speed Production Plotter/Cutter
  • 72" wide by 24 foot long
  • Dedicated PC for cutting operations


PROCESSING AREA

  • 20,000 sq. ft. available


EQUIPMENT

  • 3 Oil Heaters
  • Mokon Circulating Oil Temperature Control System
  • Dual Zone
  • 36 kW Heating Capacity per zone
  • 600 deg. F operating temperature
  • Injector Systems
  • NCTM-1000 (one unit)
  • 1000cc capacity
  • 300 psi injection pressure
  • Pneumatic operated / pressure regulated
  • Heated fluid reservoir
  • Manual/visual position indication
  • NCTM-3000 (two units)
  • 3000cc capacity
  • 300 psi injection pressure
  • Pneumatic operated / pressure regulated
  • Heated fluid reservoir
  • Linear position control
  • Digital panel meter w/ RS232 Serial COM port
  • 2 Vacuum Degassing Ovens
  • 500° F. Post Cure Oven


MACHINING OF COMPOSITE COMPONENTS

  • Current needs are supported by NCTM

 

This document maintained by sales@northcoastcomposites.com
Copyright © 2009 North Coast Composites

North Coast Composites
4605 Spring Road • Cleveland, Ohio 44131 • 216-398-8550 • Fax: 216-661-5777