|
Meets or exceeds the requirements of the following specifications:
- North Coast Composites Area Requirements For Composite Fabrication
- P.S. 20509 Area Requirements For Adhesive Bonding / Composites Fabrication
- P.S. 14274 Resin Transfer Molding of Composites, Fabrication and Acceptance Of
- 5PTPLT13 Qualification, Approval And Control of Bismaleimide Resin Transfer Molded Parts and Primary Structural Application
- 5PTPLT12 Qualification, Approval And Control of Epoxy Resin Transfer Molded Parts and Primary Structural Application
- BAC 5336 Fabrication Of Resin Transfer Molded (RTM) Fiber Reinforced Composite Parts
SPECIFICATIONS
1824 sq. ft.
- 32 ft x 57 ft x 17 ft high ceiling
- Constant positive pressure
- Monitored by Dwyer / Magnehelic Differential Pressure Gage
- Temperature and humidity controlled
- Monitored by Supco Dual Set Point Temperature Alarm (beeper)
- Monitored by Supco THC200 Thermo-Hygrometer Clock with alarm (buzzer)
- Data logging via Supco Temperature & Humidity Data Logger & Software
- 5 ton Overhead beam crane
- 30 ft span with 12 ft lift height
- Manual 5 ton chain hoist
EQUIPMENT
- CNC Automated Ply Cutter
- Carlson Pro2 High-Speed Production Plotter/Cutter
- 72" wide by 24 foot long
- Dedicated PC for cutting operations
PROCESSING AREA
EQUIPMENT
- 3 Oil Heaters
- Mokon Circulating Oil Temperature Control System
- Dual Zone
- 36 kW Heating Capacity per zone
- 600 deg. F operating temperature
Injector Systems
- NCTM-1000 (one unit)
- 1000cc capacity
- 300 psi injection pressure
- Pneumatic operated / pressure regulated
- Heated fluid reservoir
- Manual/visual position indication
- NCTM-3000 (two units)
- 3000cc capacity
- 300 psi injection pressure
- Pneumatic operated / pressure regulated
- Heated fluid reservoir
- Linear position control
- Digital panel meter w/ RS232 Serial COM port
- 2 Vacuum Degassing Ovens
- 500° F. Post Cure Oven
MACHINING OF COMPOSITE COMPONENTS
- Current needs are supported by NCTM
|
